Pa Horn Connections; Smart Gps Connector Table; Battery Connections - Standard Horizon CPV350 Owner's Manual

2.4.3

PA Horn Connections

The CPV350 can be connected to the 220SW or 240SW PA horn to hail other vessels or
send FOG, bells or whistles.
2.5

SMART GPS CONNECTOR TABLE

Pin Wire Color Description
1 Red Battery Positive
2 Green Smart GPS NMEA Input
3 Brown Smart GPS NMEA Output
4 NC ---
5 NC ---
6 Black/Yellow Battery Ground
2.6

BATTERY CONNECTIONS

1. Connect the red power wire to a 13.8 VDC ±20% power source. Connect the black
power wire to a negative ground.
2. If an optional remote extension speaker is to be used, refer to next section for
connections.
3. It is advisable to have a Certified Marine Technician check the power output and the
standing wave ratio of the antenna after installation.
Page 22
Reverse polarity connections will damage the radio!
Connection Example
Connect to Battery Positive and Red wire of GPS Antenna
Connect to Smart GPS Input
Connect to Smart GPS Output
---
---
Connect to battery ground and Black wire of GPS Antenna