Moving Images Are Not Displayed (Only The Moving Image Portion Turns Black); Projection Stops Automatically; The Message Not Supported Is Displayed - Epson EB-595Wi User Manual

Problem Solving

Moving Images Are Not Displayed (only the Moving Image Portion Turns Black)

Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?

Projection Stops Automatically

Check
Are Sleep Mode or A/V Mute Timer set to On?
Is the computer in power-saving mode?
The Message "Not supported" Is Displayed
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Do the image signal resolution and refresh rate correspond to the
mode?
(Only when projecting computer images)
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
If any of these are set to On, the power turns off automatically in the following situations.
• When Sleep Mode is set to On: If no operations are performed for a specified length of time while no image signal is
being input.
• When A/V Mute Timer is set to On: If approximately 30 minutes has passed since the A/V mute was enabled.
To prevent the projector from switching off automatically, make sure each setting is set to Off.
s ECO - Sleep Mode, A/V Mute Timer
If the computer is in power-saving mode and no operations are performed for a specified period of time, the image may
disappear. Perform an operation on the computer to display the image again.
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.129
See the documentation supplied with the computer for how to change the image signal resolution and refresh rate output
from the computer.
s "Supported Monitor Displays" p.188
http://www.pureglare.com.au
Remedy
Remedy
p.144
Remedy
156