Projecting Images
a
After projecting the image, adjust the image if necessary.
s "Correcting Keystone Distortion"
s "Correcting the Focus"
p.52
p.57
http://www.pureglare.com.au
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using Remote Control
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
46
Using the Control Panel