Adjusting Projected Images
Adjusting the Image Size
Press the [Wide] and [Tele] buttons on the control panel to adjust the size
of the projected image.
a
You can also make adjustments from the Configuration menu.
s Settings - Zoom
Adjusting the Position of the Image (Image Shift)
You can fine tune the position of the image without moving the projector.
p.131
a
Perform Adjust Zoom or Keystone.
"Adjusting the Image Size"
s
"Correcting Keystone Distortion"
s
The Image Shift screen is displayed after you have made adjustments.
b
Adjust the projection position using the [
buttons on the remote control, or the [
buttons on the control panel.
Using Remote Control
You can shift the image diagonally by pressing any pair of adjacent
[
], [
of [
], [
w
v
control panel.
http://www.pureglare.com.au
p.55
p.52
], [
w
Using the control panel
], [ ], and [ ] buttons, or a combination
], [Wide], and [Tele] buttons on the remote control or
55
], [
], [ ], and [ ]
], [Wide], and [Tele]
v