Moving Images Are Not Displayed (Only The Moving Image Portion Turns Black); Projection Stops Automatically; The Message Not Supported Is Displayed; The Message No Signal Is Displayed - Epson EB-X14 User Manual

Problem Solving

Moving images are not displayed (only the moving image portion turns black)

Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)

Projection stops automatically

Check
Is Sleep Mode set to On?
The message "Not supported" is displayed.
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
The message "No Signal" is displayed.
Check
Are the cables connected correctly?
Is the correct port selected?
Is the power for the computer or video source turned on?
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.68
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays" p.102
Check that all the cables required for projection are securely connected.
s "From Installation to Projection" p.30
Change the image by pressing the [Source Search] button on the remote control or the control panel.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"
Turn the power on for the equipment.
Remedy
Remedy
p.71
Remedy
Remedy
81
p.31