Projecting Images; Getting Ready To Project - Epson EB-595Wi User Manual

Projecting Images

Getting Ready to Project

This section explains the procedure for connecting the projector to a
computer with the computer cable and projecting images.
Caution
Be sure to connect the cable of the source to the projector first, and then
connect the power cord to the projector.
ON
a
Connect the projector to the computer with the computer cable.
b
Connect the projector to an electrical outlet with the power cord.
c
Turn on the projector.
Warning
When turning on the projector, do not look into the projection lens.
This could cause damage to eyesight due to the powerful light emitted.
When turning on the projector at a distance using the remote control,
make sure there is no one looking into the lens.
Take particular care when there are children present.
d
Turn on the computer.
e
Change the computer's screen output.
When using a laptop computer, you need to change the screen
output from the computer.
Hold down the Fn key (function key), and press the b key.
a
• The method for changing differs depending on the computer
being used. See the documentation supplied with the
computer.
• Press the [t] power button twice to turn the projector off.
If the image is not projected, you can change the projected image using one
of the following methods.
• Press the [Source Search] button on the control panel or the remote
control.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)"
• Press the button for the target port on the remote control.
"Switching to the Target Image Using the Remote Control"
s
http://www.pureglare.com.au
p.46
45
p.47