Table of Contents
Advertisement
Problem Solving
Problems Relating to Images
No images appear
Check
Did you press the [t] button?
Are the indicators switched off?
Is A/V Mute active?
Are the Configuration menu settings correct?
Is the image to be projected completely black?
(Only when projecting computer images)
Is the image signal format setting correct?
(Only when projecting images from a video source)
Is Windows Media Center displayed in full screen?
(Only during a network connection)
Is an application using the Windows DirectX function displayed?
(Only during a network connection)
Moving images are not displayed (only the moving image portion turns black)
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied.
Connect the projector's power cable correctly.
s "From Installation to Projection"
p.30
Check that your electrical outlet or power source is functioning correctly.
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Reset all of the settings.
s Reset - Reset All
p.81
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal
p.66
When Windows Media Center is displayed at full screen, you cannot project using network connection. Reduce the
screen size.
Applications using the Windows DirectX function may not display images correctly.
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Remedy
p.47
Remedy
89
Advertisement
Table of Contents
