Adjusting Projected Images
A
Extend the rear foot.
B
Retract the rear foot.
Correcting the Focus
Display the test pattern, and then adjust the focus.
a
Press the [Menu] button.
"Using the Configuration Menu"
s
Using Remote Control
p.125
Using the Control Panel
http://www.pureglare.com.au
b
Select Pattern from Settings.
c
Select Test Pattern, and then press the [Enter] button.
When projecting images on a 4:3 screen using a wide-screen
projector, set Pattern Type to Pattern 5 and select Pattern
Display.
Settings - Pattern - Pattern Type
s
57
p.131