Connecting Equipment
Connecting a Microphone
You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone.
a
• Plug-in-power is not supported.
• Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound.
s Settings - Mic Input Level
• Make the following settings to output audio from a microphone when the projector is off.
- Set Standby Mode to Communication On.
- Set A/V Output to Always On.
s ECO - Standby Mode
s Extended - A/V Settings - A/V Output
p.131
p.144
p.132
http://www.pureglare.com.au
37