Using The Interactive Features Over A Network; Precautions When Connecting To A Projector On A Different Subnet - Epson EB-595Wi User Manual

Using the Interactive Features over a Network

You can use your projector in computer interactive mode over a network.
If you want to annotate when using computer interactive mode over a
network, you need to use Easy Interactive Tools (or another annotation
program). Easy Interactive Tools allows you to use various drawing tools,
treat the drawing area as a page, and save your drawings as a file for a later
use. You can install Easy Interactive Tools from the EPSON Projector
Software for Easy Interactive Function CD. You can also download the
software from the Epson website.
• Use one of the following software applications to setup your projector
on a computer network and use computer interactive mode over the
network:
• EasyMP Network Projection version 2.85 or later (for Windows)
or 2.83 or later (for OS X)
See the EasyMP Network Projection Operation Guide for instruc‐
tions.
EasyMP Network Projection Operation Guide
s
• Quick Wireless version 1.32 or later (Windows only)
See the instructions included with the optional Quick Wireless
Connection USB Key.
• With either application, select Use Interactive Pen on the General
settings tab and Transfer layered window on the Adjust performance
tab.
a
• You can only use one pen or one finger (EB-595Wi) at a time.
• The response may be slower over the network.
• When using computer interactive mode over a network, you cannot
change the Pen Mode setting using the remote control or from the
projector's Extended menu. The
• You cannot change the Pen Operation Mode setting from the
projector's Extended menu.
• You can connect up to four projectors at one time using EasyMP
Network Projection. When connected to multiple projectors,
computer interactive mode functions for any projector. Operations
performed on one projector are reflected in other projectors.
• To use annotation mode over the network, clear Use Interactive Pen
on the General settings tab and Transfer layered window on the
Adjust performance tab in EasyMP Network Projection or Quick
Wireless Connection, and then reconnect to the network.
Precautions When Connecting to a Projector on a
Different Subnet
Follow these precautions when you connect to a projector on a different
subnet using EasyMP Network Projection and use interactive features:
• Search for the projector on the network by specifying the projector's IP
address. You cannot search for it by specifying the projector name.
• Make sure that you get an echo reply back from the network projector
when sending an echo request by the ping command. When the
Internet Control Message Protocol (ICMP) option is disabled on the
router, you can connect to the projector at remote locations even if you
cannot get the echo reply back.
http://www.pureglare.com.au
92
icon is also not available.