About Event Id - Epson EB-595Wi User Manual

About Event ID

Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Event ID
0432 Failed to start EasyMP Network Projection.
0435
0434 Network communication is unstable.
0482
0484
0485
0433 Cannot play transferred images.
0481 Communication was disconnected from the computer.
0483 EasyMP Network Projection ended unexpectedly.
04FE
0479 A system error occurred in the projector.
04FF
0891 Cannot find an access point with the same SSID.
0892 The WPA/WPA2 authentication type does not match.
0893 The WEP/TKIP/AES encryption type does not match.
0894 Communication was disconnected because the projector connected to an
unauthorized access point.
0898 Failed to acquire DHCP.
0899 Other communication errors
Cause
http://www.pureglare.com.au
Remedy
Restart the projector.
Check the network communication status, and reconnect after waiting for a
while.
Restart EasyMP Network Projection.
Check the network communication status, and then restart the projector.
Restart the projector.
Set the computer, the access point, and the projector to the same SSID.
Check that the wireless LAN security settings are correct.
s Security p.140
Contact your network administrator for more information.
Check that the DHCP server is operating correctly. If you are not using DHCP,
turn off the DHCP setting.
s Wireless LAN - IP Settings p.139
If restarting the projector or EasyMP Network Projection does not solve the
problem, contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
Epson Projector Contact List
s
169