Info Menu (Display Only) - Epson EB-595Wi User Manual

List of Functions
Sub-menu
(This item can only be set when Power Consumption is set to
Light Optimizer
Normal or Auto.)
When set to On, the lamp brightness is adjusted according to the
image being projected. This helps to reduce the amount of
electricity being used by lowering the lamp's brightness
according to the scene being projected.
The setting is stored for each Color Mode.
When set to On, this automatically stops projection when no
Sleep Mode
image signal is being input and no operations are carried out for a
specified length of time. Also, if no image signal is input for a
specified length of time, the lamp dims until the power turns off.
When an image signal is input, the projector returns to normal
operating status.
When Sleep Mode is set to On, you can set the time before the
Sleep Mode Tim‐
projector automatically turns off within a range of 1 to 30
er
minutes.
When set to On, this turns off the power automatically 30
A/V Mute Timer
minutes after A/V mute is enabled. Also, if A/V mute is enabled
and a specified length of time has passed, the lamp dims until the
power turns off. When A/V mute is disabled, the projector
returns to normal operating status.
If you set Communication On, you can perform the following
Standby Mode
operations even if the projector is in standby mode.
• Monitor and control the projector from a computer over the
network
• Output audio and images to an external device (only when
A/V Output is set to Always On)
• Output microphone audio from the projector's speaker (only
when A/V Output is set to Always On)
When set to On, when the lamp brightness changes from normal
ECO Display
to low or low to normal, leaf icons are displayed at the bottom-
left of the projected screen to indicate the power-saving status.
Function
http://www.pureglare.com.au
Sub-menu
You can reset all adjustment values on the ECO menu to their
Reset
default settings, except for Standby Mode. See the following to
return all menu items to their default settings.
s "Reset Menu"

Info Menu (Display only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.46
Sub-menu
Lamp Hours You can display the cumulative lamp operating time
When the lamp replacement time is reached, the characters
are displayed in yellow.
Function
p.146
Function
145
*
.