Part Names and Functions
Remote Control
Name
A
[Power] button
[t]
B
[Computer] button
C
[Video] button
D
Numeric buttons
E
[Auto] button
F
[Aspect] button
G
[Num] button
H
[Menu] button
http://www.pureglare.com.au
Function
Turns the projector power on or off.
s "Getting Ready to Project"
p.45
Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
Each time the button is pressed, the image cycles through
the S-Video, Video, HDMI1/MHL, and HDMI2 ports.
• Enter the Password.
s "Setting Password Protection"
p.110
• Use this button to enter numbers in Network settings
from the Configuration menu.
If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.61
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection"
p.110
Displays and closes the Configuration menu.
s "Using the Configuration Menu"
p.125
17