Easy Interactive Driver System Requirements (Os X Only) - Epson EB-595Wi User Manual

Interactive Feature Modes
a
• The
icon is displayed on the right for the first time.
Next time, it is displayed on the side from which you last
opened the toolbar.
• If the
icon is not displayed, set the Pen Mode Icon
setting to On in the projector's Extended menu.
s Extended - Display - Pen Mode Icon
m
Select the icon, and then select the
a
You can also change to computer interactive mode by doing the
following:
• Pressing the [Pen Mode] button on the remote control.
• Changing the Pen Mode setting on the projector's Extended
menu to PC Interactive.
s Extended - Easy Interactive Function - Pen
Mode p.135
You can now operate the computer using the interactive pen or your
finger.
"Using the Interactive Pens"
s
"Using Your Finger for Interactive Touch Operations (EB-595Wi only) "
s
p.80
"Interacting with the Screen"
s
"Using the Interactive Features over a Network"
p.132
s
icon.
a

Easy Interactive Driver System Requirements (OS X only)

To use computer interactive mode, you must install the Easy Interactive
Driver on your computer. Check the system requirements necessary to run
the software.
http://www.pureglare.com.au
p.73
p.86
• You can also control the projector from the projected screen by
using the projector control toolbar displayed on the screen. Tap the
or icon if the projector control toolbar is not displayed.
• You can move the
and
the or toolbar tab right and left.
• You can also do the following in computer interactive mode:
- Use the Tablet PC input panel in Windows 7 or Windows Vista.
- Use Ink Tools for annotation in Microsoft Office applications.
• Using two interactive pens at the same time may cause interference
in some application software. In that case, move any pen you are not
using away from the projection screen.
71
p.92
toolbar tabs up and down, and