Table of Contents
Advertisement
Connecting Equipment
a
• When connecting to the Audio1, Audio2, and Computer1 ports, we recommend connecting cables to the ports in the following order: Audio1, Audio2, and then
Computer1.
• You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output
• If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the Audio Input port. After connecting the cable, select
the input port you connected to from HDMI1 Audio Output or HDMI2 Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI1 Audio Output/HDMI2 Audio Output
• You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display.
s "Projecting with USB Display"
• When projecting a computer connected to the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the Configuration menu.
s Extended - Operation - Monitor Out Port
p.132
p.48
p.132
http://www.pureglare.com.au
p.132
30
Hide quick links:
Advertisement
Table of Contents
