Table of Contents
Advertisement
Problem Solving
The Remote Control Does Not Work
Check
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Is the remote control too far from the projector?
Is direct sunlight or strong light from fluorescent lights shining onto
the remote receiver?
Is the correct setting for the Remote Receiver selected?
Are the batteries dead or have the batteries been inserted in the
wrong direction?
I Want to Change the Language for Messages and Menus
Check
Change the language setting.
Mail Is Not Received even if an Error Occurs with the Projector
Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Point the remote control towards the remote receiver during operation.
s "Remote Control Operating Range"
The operating range for the remote control is about 6 m.
s "Remote Control Operating Range"
Set the projector up in a location where strong light does not shine onto the remote receiver.
s Settings - Remote Receiver
p.131
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver
p.131
Insert new batteries in the correct direction.
s "Replacing the Remote Control Batteries"
Adjust the Language setting from the Configuration menu.
s Extended - Language
p.132
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s ECO - Standby Mode
p.144
When the projector comes to a sudden stop, email cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
Epson Projector Contact List
s
Check that your electrical outlet or power source is functioning correctly.
http://www.pureglare.com.au
Remedy
p.20
p.20
p.19
Remedy
Remedy
167
Hide quick links:
Advertisement
Table of Contents
