Table of Contents
Advertisement
BTHomeHub2-2345
a2b3c4d5ef
Your wireless settings card
Default wireless settings
Authentication:
WPA-PSK
Encryption type:
AES
Mode:
infrastructure
Follow the instructions below for your computer's operating system. If your
5
wireless adapter has its own software, use it to set up your wireless connection
(your software's 'help' section may be useful if you aren't sure how to do this).
Windows XP/Vista/7
Go to Start, click
Connect
1
XP: click
Wireless Network
Vista: click
Connect to
7: click on the wireless icon in the
system tray.
Highlight your Hub's network
2
name (checking that the last four
digits match your Hub's details,
e.g. BTHomeHub2-2345) and
click Connect.
Type your Hub's wireless key into the:
3
Network Key
XP:
Security key or passphrase
Vista/7:
Click
Connect
and wait a few
4
moments while your computer
connects to your Hub.
Wireless settings label (on back of Hub)
or
WPA2-PSK
or
TKIP
(not ad hoc)
To.
Connection.
network.
box.
box.
Network name / SSID: BTHomeHub2-2345
a2b3c4d5ef
Admin password: A1C2E3F4
Wireless PIN: 1234-5678
(also known as WPA-Personal)
Mac OS X
Click the
AirPort Status
1
the menu bar.
Highlight your Hub's network
2
name (checking that the last four
digits match your Hub's details,
e.g. BTHomeHub2-2345).
Mac OS X 10.4 and earlier only:
3
in the
Wireless Security
WPA
Personal.
Type your Hub's wireless key into
4
the
Password
box.
Click
OK
and wait a few moments
5
while your computer connects to
your Hub.
icon in
box, select
Help
27
Advertisement
Table of Contents
