Table of Contents
Advertisement
How do I make a connection to my computer without using the CD?
Q
The steps to follow are slightly different depending on what you're connecting (e.g.
a computer, games console or other device) and how you're going to connect it
(e.g. are you going to use wireless or the Ethernet cable).
Choose what you want to connect. I want to connect my:
computer using wireless – go to
•
games console or other device using wireless – go to
•
computer using the Ethernet cable – go to
•
games console or other device using the Ethernet cable – go to
•
If you aren't sure whether to use wireless or the Ethernet cable, see page 3.
A
I want to connect my computer using wireless
If your computer is already connected to your Hub using an Ethernet cable,
1
unplug this cable.
Place your computer close to your Hub for a good wireless signal.
2
If you haven't already, install your wireless adapter in your computer using
3
the adapter manufacturer's instructions. If you're using a laptop with built-in
wireless, turn on wireless by either using the wireless switch (if your computer
has one) or activating wireless from within your wireless software. Your wireless
adapter must be 802.11b, g or n compliant.
If you don't have a wireless adapter or your computer isn't wireless enabled,
see page 3.
Find your Hub's preset network name/SSID and wireless key. These are printed
4
on your wireless settings card (found in your Hub's box) and also on the back of
your Hub (see illustration on next page).
Help
26
A
C
B
D
Advertisement
Table of Contents
