Table of Contents
Advertisement
B
Replace an existing BT Voyager router
Turn off your router at the mains power socket and unplug its power cable.
1
Unplug the DSL cable from your router's DSL socket as well as from its ADSL
2
filter (you can leave the filter plugged into its phone socket for the moment).
If fitted, unplug the 'phone line' cable and any telephone from your router
3
(Voyager 220v and 2500v only).
Unplug the Ethernet or USB cable from your router.
4
Set aside this old Hub and the cables you've just unplugged.
5
Follow the Quick Start guide in your welcome pack to set up your new
6
BT Home Hub.
For information on disposing of electrical equipment, see page 35.
C
Replace another modem/router
If your computer has a built-in modem or router, unplug the cable between your
computer and the phone socket.
If your computer connects to a separate modem/router:
turn off your modem/router
1
unplug any cables between your modem/router, computer, the phone socket
2
and the mains power socket. You can leave any ADSL filters in phone sockets
set aside the old modem/router and cables
3
follow the Quick Start guide in your welcome pack to set up your new
4
BT Home Hub
For information on disposing of electrical equipment, see page 35.
Help
22
Advertisement
Table of Contents
