Default All Code 11 / Code 128 Settings
Code 11 Selection
On
2 Check Digits
Minimum ]
Code 128 Selection
On
Minimum ]
] A two digit number is required after scanning this programming bar code.
Scan your selection on the Programming Chart (inside back cover).
Programming Tip: If a symbology will not be used, we recommend turning
it off to minimize the chance of a misread.
SCANTEAM 3400PDF User's Guide
Code 11
Check Digits
Required
1 Check Digit
Message
Length
Maximum ]
Code 128
Message
Length
Maximum ]
Off
Off
4–9