Code 39 Selection - Welch Allyn Scansteam 3400PDF User Manual

Default All Code 39 Settings

Code 39 Selection

On
Transmit
Enable
Enable
] A two digit number is required after scanning this programming bar code.
Scan your selection on the Programming Chart (inside back cover).
Programming Tip: If a symbology will not be used, we recommend turning
it off to minimize the chance of a misread.
4–4 SCANTEAM 3400PDF User's Guide
Code 39
Start / Stop
Characters
Don't Transmit
Full ASCII
Refer to the Full ASCII
Chart on page 4-6.
Disable
Append
Off
Disable