3.4 Magnetic Stripe Card Reader Port
The SCANTEAM 8300 supports the attachment of magnetic
stripe readers capable of outputting synchronous TTL signals
(clock and data) on tracks 1, 2 and 3. The unit can decode any
combination of one, two, or three tracks simultaneously,
supporting bi directional card swipes.
Connector Type:
RJ-45 8 pin modular (ST2000 compatible)
Connector Pinouts:
3.5 Bar Code Scanner Port
An optional interface connector (a factory installed option)
installed in the rear panel of the SCANTEAM 8300 supports the
attachment of a + 5 volt non decoded output scanner. The
SCANTEAM 8300 is compatible with all Welch Allyn contact and
non contact bar code scanners, including bar code contact
wands, lasers, CCDs, and swipe readers. Consult your Welch
Allyn Sales Coordinator for specific model numbers of
compatible scanners.
Hardware Interface Description
3–6
Pin #
Function
1
Ground
2
Mag Clk 3
3
VCC (+ 5V)
4
Mag Clk 2
5
Mag Data 2
6
Mag Data 3
7
Mag Data 1
8
Mag Clk 1