Default All Serial Communication Settings
CTS Check Selection
This selection allows you to select the software programming feature that
checks for a CTS signal, if your application does not have a CTS I/O line. Default
= Disable.
Enable
Baud Rate Selection
This selection sets the baud rate from 600 bits per second to 38,400 bits per
second. Programming baud rate causes the data to be sent at the specified
rate. The host terminal must be set up for the same baud rate as the scanner,
to ensure reliable communication. Default = 9600 bps.
600
2400
9600
38400
2–12
SCANTEAM 3400PDF User's Guide
Disable
1200
4800
19200