Keyboard Style Modifiers Selection - Welch Allyn Scansteam 3400PDF User Manual

Keyboard Style Modifiers
Keyboard Style Modifiers
This programming selection allows you to program special keyboard features,
such as CTRL+ codes and Turbo Mode.
Default All - This sets all Keyboard Style Modifiers to their default states
(Control + ASCII Mode Off, Turbo Mode Off, Numeric Keypad Mode Off).
Control + ASCII Mode On - If you scan this selection, the scanner sends key
combinations for ASCII control characters for values 00-1F. Refer to page 6-1
for CTRL+ Values. Default = Off
Turbo Mode - Selecting Turbo Mode On, (for the IBM AT only), programs the
scanner to send characters to the terminal faster.
Numeric Keypad Mode - Selecting Numeric Keypad Mode On sends numeric
characters as if entered from a numeric keypad. Default = Off
Automatic Direct Connect - When Emulate External Keyboard has been
selected (page 3-6), Automatic Direct Connect Mode keeps the integrated
keyboard from becoming permanently disabled. Default = Off
Note: This selection disabled the keyboard for the entire duration of the bar
code transmission.
Control + ASCII Mode On
Turbo Mode On
Numeric Keypad Mode On
Automatic Direct Connect
Mode On
SCANTEAM 3400PDF User's Guide
Default = Off
Default All
Control + ASCII Mode Off
Turbo Mode Off
Numeric Keypad Mode Off
Automatic Direct Connect
Mode Off
3–7