Bar Code Chart; Figure 4.2 Bar Code Chart - Welch Allyn Scanteam 6180 Technical Manual

SCANTEAM SRD–6180/SID–6280
Programming Menu
USE THIS PAGE
In combination with the adjoining menu pages to program the 6180.
The bar codes on this page correspond to symbols in shaded areas on adjoining menu pages. SCAN these bar
codes in the sequence indicated on menu page to program desired selections and variables.
ROMAN NUMERALS
I
XI
II
XII
III
XIII
IV
XIV
V
XV
VI
XVI

Figure 4.2 Bar Code Chart

Note that the chart contains symbol groupings that include ROMAN
NUMERALS, LETTERS and NUMBERS. The sequence in which these
symbols are scanned generates the programming instructions which enable
or disable specific decoder functions.
The right hand column of the Chart contains three (3) bar code symbols
labeled DEFAULT, ESCAPE and WA. When these symbols are scanned
specific instructions are instantaneously sent to the wand.
4–4
Programming the Scanner

BAR CODE CHART

LETTERS DIGITS
A
0 (YES)
B
1 (NO)
C
2
D
3
E
4
F
5
OTHERS
ESCAPE
DEFAULT
W.A.