Enable Pdf Selection; Show Gli Blocks Selection; Macro Pdf Selection - Welch Allyn Scansteam 3400PDF User Manual

Enable PDF Selection

To enable PDF decoding, scan the PDF Enable bar code below. Default =
Enable.
Enable

Show GLI Blocks Selection

Enabling this feature causes GLI Commands to be issued where located within
their encoded data sequences. When enabled, the \" is used as an escape
character and natural occurrences of \" in data are replaced by \\". Default =
Disable.
Show GLI Control Blocks
Note: Enabling Show Macro Control causes backslash characters occurring
normally in encoded data to be issued twice (i.e., as \\").

Macro PDF Selection

Up to 16 Macro PDF symbols that encode up to 5,500 characters of data may be
combined in designated order and transmitted as a single data packet in the
PDF417 reader. Disabling Macro PDF causes the data from every PDF417
symbol to be transmitted independently in the order scanned.
To enable PDF decoding, scan the Macro PDF Enable bar code below. Default =
Enable.
Enable
4–16 SCANTEAM 3400PDF User's Guide
Disable
Don't Show GLI Control Blocks
Disable