To Remove The Top Elements Indicator Light; To Remove The Electronic Oven Control; To Remove The Oven Light Switch; To Remove The Control Panel - Electrolux NEXT GEN Service Manual

To remove the top element's indicator light:
1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Disconnect the wires from the light.
4. Push in and down.
Indicator light

To remove the electronic oven control:

1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Disconnect the wires and harness from the
control board.
4. Remove the four screws. (One from each
corner)
Backview of electronic oven control

To remove the oven light switch:

1. Disconnect power from the range and remove
the back panel from the backguard.
2. Disconnect the wires from the switch,
squeeze the sides, and push up.
Oven light switch

To remove the control panel:

1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Remove the knobs.
4. Disconnect the infinite switches or
potentiometer and user interface boards from
the control panel.
5. Disconnect the electronic oven control.
6. Disconnect the indicator light and the oven light
switch.
7. Remove two square drive screws from the back
top corners.
Square drive corner screws
8. Remove two phillips screws, one in each
corner of lower front. Roll the bottom of the
control panel out and lift up.
Front corner screw

To remove the end caps:

1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Remove the four screws holding the control
panel to the end caps and lift it up.
71
s