To Remove The Splasher Panel - Electrolux NEXT GEN Service Manual

Ranges with coil top elements:
4. Raise the front of the main top and disengage
the lift and lock rods.
Coil element top lift and lock rod
Smooth top ranges:
5. Open the oven door and remove the two phillips
screws holding the main top to the front frame.
Screws
Smoothtop main top screws
6. Remove two square drive screws from each main
top hinge and slide the top forward about 2 inches.
Main top hinge screws
7. Remove the two screws holding the end cap to the
splash guard and the side panel, and lift the end cap
up.
screws
End cap screws

To remove the splasher panel:

1. Disconnect power from the range.
2. Remove the back panel from the backguard.
3. Remove the four screws holding the control panel to
the end caps and lift it up.
Ranges with coil top elements:
4. Remove the top elements, and unfasten the
terminal blocks from the main top by removing one
screw from each terminal block.
s
Terminal block screw
5. Raise the front of the main top and disengage
the lift and lock rods.
6. Remove the four hinge screws.
72