Notes On Cleaning; How To Remove: Shelf Supports - Electrolux COP802X User Manual

12.1 Notes on cleaning

Clean the front of the appliance only with a microfibre cloth with warm water and
a mild detergent.
Use a cleaning solution to clean metal surfaces.
Cleaning
Clean stains with a mild detergent.
Agents
Clean the cavity after each use. Fat accumulation or other residue may cause
fire.
Moisture can condense in the appliance or on the door glass panels. To de‐
crease the condensation, let the appliance work for 10 minutes before cooking.
Do not store the food in the appliance for longer than 20 minutes. Dry the cavity
Everyday Use
only with a microfibre cloth after each use.
Clean all accessories after each use and let them dry. Use only a microfibre
cloth with warm water and a mild detergent. Do not clean the accessories in a
dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

12.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
The retaining pins on the tele‐
scopic runners must point to the
front.
CARE AND CLEANING
1
2
29/40