Important Safety Instructions; Tools You Will Need; Normal Installation Steps; Anti-Tip Bracket Installation Instructions - Electrolux NEXT GEN Service Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING: If the information in this manual is not
followed exactly, a fire or electrical shock may result
causing property damage, personal injury or death.
Important Notes to the Installer
1. Read all instructions contained in these installation
instructions before installing range.
2. Remove all packing material from the oven
compartments before connecting the gas and
electrical supply to the range.
3. Observe all governing codes and ordinances.
4. Be sure to leave these instructions with the
consumer.
Important Note to the Consumer
Keep these instructions with your owner's guide for
future reference.
• As when using any appliance generating heat, there
are certain safety precautions you should follow.
These are listed in the Use & Care Manual, read it
carefully.
• Be sure your range is installed and grounded properly
by a qualified installer or service technician.
• Make sure the wall coverings around the range can
withstand the heat generated by the range.
• To eliminate the need to reach over the surface
elements, cabinet storage space above the elements
should be avoided.
Before Starting - Tools You Will Need:
For leveling legs and Anti-Tip Bracket:
• Adjustable wrench or channel lock pliers
• 5/16" Nutdriver or Flat Head Screwdriver
• Electric Drill & 1/8" Diameter Drill Bit (MasonryDrill
Bit if installing in concrete)
For electrical supply connection:
• 1/4" & 3/8" Socket driver or Nutdriver
Additional Materials You Will Need
• Power Supply Cord or
• Copper Electrical Wiring & Metal Conduit (for hard
wiring)

Normal Installation Steps

1. Anti-Tip Bracket Installation Instructions

Important Safety Warning - To reduce the risk of
tipping of the range, the range must be secured to
the floor by properly installed anti-tip bracket and
screws packed with the range. Failure to install the
anti-tip bracket will allow the range to tip over if
excessive weight is placed on an open door or if a
child climbs upon it. Serious injury might result
from spilled hot liquids or from the range itself.
If range is ever moved to a different location, the
anti-tip brackets must also be moved and installed
with the range.
Instructions are provided for installation in wood or
cement fastened to either the floor or wall. When
installed to the wall, make sure that screws
completely penetrate dry wall and are secured in
wood or metal. When fastening to the floor or wall,
be sure that screws do not penetrate electrical
wiring or plumbing.
A. Locate the Bracket Using the Template -(Bracket
may be located on either the left or right side of the
range. Use the information below to locate the
bracket if template is not available). Mark the floor
or wall where left or right side of the range will be
located. If rear of range is against the wall or no
further than 1-1/4" from wall when installed, you may
use the wall or floor mount method. If molding is
installed and does not allow the bracket to fit flush
against the wall, remove molding or mount bracket
13