Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha ZUMA 125 2020 Owner's Manual

Periodic maintenance and adjustment

Tail/brake light

If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
EAU43041
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
7-30
1
[ECA11192]
EAU24205
1
2
3
4
5
6
7
8
9
10
11
12
13
14