3 • Removal & Replacement
3.1
carriage Unit Related
3.1.0 Removing the Carriage Unit
Carriage unit consists of the carriage, the guide rail of
the carriage and the carriage motor.
1) Remove the upper cover unit. (See A-1
Removing the Upper Cover Unit)
2) Remove the lower cover unit. (See A-3
Removing the Lower Cover Unit)
3) Turn the gear [1] clockwise with using a
screwdriver, to uncap the print head. The cap
can be seen from the window [2].
caution-
Never move the carriage being
capped to prevent the print
head and the cap from damage.
4) Open the ink tank exchange cover, and
remove the ink tank.
5) Remove the print head [1].
3-4
[2]
[1]
[1]
[1]
SDT345A DM100i/DM200i Series Service Manual & Parts List