Troubleshooting; Faults With Display Message - Schaerer Coffee Joy Operating Instructions Manual

www.schaerer.com
Display message
place brewer
Brewer position switch
40

Troubleshooting

General troubleshooting procedure:
► Switch the coffee machine off and, after several seconds, on again.
 In most cases, the fault will be eliminated automatically.
► Repeat the steps that led to the fault.
If the fault occurs again:
► Find the fault in the following tables.
► Perform the described troubleshooting steps.
If the fault persists:
► Contact your service partner and describe the fault.
If a fault occurs that is not described in this chapter, please contact your service partner imme-
diately.

Faults with display message

Messages are displayed if intervention by a user or service technician is needed to ensure op-
erating readiness of the machine. There are two different causes for display messages:
• Note
• Fault
See "Operation" - "Display messages" for notes.
The following table describes display messages pertaining to faults as well as the steps need-
ed to eliminate these.
Cause
The brewing unit is not inserted.
The brewing unit is not correctly insert-
ed.
The brewing unit is stiff.
What to do
► Insert the brewing unit.
► Check that the brewing unit is correctly seated.
► Remove the brewing unit.
 There are two nozzles with black sealing rings
on the inside of the machine.
► Grease the sealing rings with grease from the ac-
cessories.
► Put the brewing unit back in place.
Troubleshooting
BASCJ_EN
V01 | 02.2011