Adjusting The Grinding Fineness; Water Filter (Option); Installing The Water Filter For The Internal Drinking Water Tank - Schaerer Coffee Joy Operating Instructions Manual

Service and maintenance
CAUTION!
User at risk!
CAUTION!
Risk of machine
damage!
BASCJ_EN
V01 | 02.2011

Adjusting the grinding fineness

The grinding fineness is influenced by wear on the grinder disk. To ensure a constant grinding
quality, the grinding fineness needs to be adjusted when required.
Danger of injury from rotating grinding discs in the grinder.
Never reach into the bean hopper while the coffee machine is switched on.
If the grind level is set while the grinder is idle, the grinder can be set too firmly and may
not start as a result.
The grinder must always be running while it is being adjusted.
► Open the cover of the bean hopper.
► Place the multitool onto the grind level adjuster (see figure).
► Press the beverage button (e.g. espresso) and wait for the grinder to start running.
Option 1: Finer setting of grind level
► Press the multitool down and turn anticlockwise.
Option 2: Coarser setting of grind level
► Press the multitool down and turn clockwise.

Water filter (Option)

Installing the water filter for the internal drinking water tank

Read the previous chapter entitled "Water quality".
The "Filter for the internal drinking water tank" initial installation set can be obtained from
Schaerer AG if the water quality is insufficient (order number: 071398).
The water filter is only suitable for installation in the internal drinking water tank of the machine.
► Remove the water outlet screen installed in the water tank.
► Open the water filter box.
 The water filter adapter is located at the top, and the separately packaged filter car-
tridge is found beneath it.
► Pull up the locking mechanism on the adapter.
► Attach the adapter to the water outlet connector and push down the locking mechanism.
www.schaerer.com
31