Introduction; Side Cover Assembly - Datamax M-Class Mark II Maintenance Manual

4.0 Introduction

This section details removal and replacement methods for various printer components;
where multiple equipment types or options are available, use the procedure that best
matches the configuration.
 Always disconnect AC power before performing service.
Wear a wrist strap and follow all ESD prevention measures.

Use extreme care and never use sharp objects on the Printhead, Platen,

CAUTION or Assist Roller.

4.1 Side Cover Assembly

Removal:
1. Turn OFF and unplug the printer.
2. Raise the Access Cover. Remove the three Screws that secure the Side Cover Assembly
to the rear and the base of the printer.
Access
Cover
Removal and Replacement
Screws
4-1
Side
Cover Assembly