Media Supply Assembly; Media Hanger - Datamax M-Class Mark II Maintenance Manual

Installation:
1. Place the Idler Post into the Spur Gear, and then secure the components in the
Assembly Casting with the Screw.
2. Install the Internal Rewinder; see Section 4.10.

4.11 Media Supply Assembly

4.11.1

Media Hanger

Removal:
1. Remove the Main Logic PCB; see Section 4.4.
2. Remove the three Hanger Screws that secure the Media Hanger to the Centerplate and
then remove the Media Hanger.
Removal and Replacement
Assembly
Casting
Media
Hanger
Spur
Gear
Idler
Post
Centerplate
Hanger
Screws
4-28
Screw