Transmission - KYMCO Mongoose/KXR 250 Service Manual

10
.FINAL REDUCTION/
TRANSMISSION SYSTEM
Inspect the needle bearing for allow play in
the transmission case cover or the bearing
turns roughly.
If any defects are found, replace the bearing
with a new one.
ASSEMBLY
Install the needle bearing.
Install the oil seal and bearing.
Install the bearing circlip.
Install the drive axle and drive axle cirelip.

TRANSMISSION

REMOVAL
Remove the transmission cover. (Refer to the
"TRANSMISSION CASE COVER REMOVAL" in
the chapter 10)
Check the transmission operation.
Unsmooth operation → Repair.
Remove the shift shaft.
10-5
Mongoose/KXR 250
Needle Bearing
Needle Bearing
Bearing
Shift Shaft