KYMCO Mongoose/KXR 250 Service Manual page 34

2
. FRAME COVERS/EXHAUST MUFFLER
CENTER FRAME COVER REMOVAL
Remove the seat. (See page 2-3)
Remove the fuel fill cap.
Remove the four bolts at the center frame
cover, then remove the center frame cover.
After remove, be sure to tighten the fuel
fill cap.
FRONT FENDER REMOVAL
Remove the seat (See page 2-3), right and
left side frame cover (See page 2-3) and
center frame cover. (See page 2-5)
Remove the two bolts at the front fender left
side.
Remove the two screws attaching the inlet
hose.
Remove the two bolts at the front fender
right side.
Remove the screw, then remove the drive
select grip from the drive select lever.
2-5
Mongoose/KXR 250
Bolts
Fuel Fill Cap
Bolts
Screws
Bolts
Screw
Select Grip