KYMCO Mongoose/KXR 250 Service Manual page 33

2
. FRAME COVERS/EXHAUST MUFFLER
Remove the three bolts at the rear fender.
Remove the two screws attaching the right
and left floor board.
Remove the two screws attaching the frame
body and three screws attaching the outlet
hose, then remove the rear fender.
During removal, do not pull the joint
claws forcedly to avoid damage.
HANDLEBAR COVER REMOVAL
Remove the two screws at the handlebar
cover.
Disconnect the indicator lamp coupler, then
remove the handlebar cover.
Mongoose/KXR 250
Bolts
Screws
Screws
Screws
Outlet Hose
Screws
Indicator Lamp coupler
2-4