KYMCO Mongoose/KXR 250 Service Manual page 161

13
. BRAKE SYSTEM
Mongoose/KXR 250
Snap Ring
Remove the brake lever bolt and the brake
lever.
Remove the piston rubber cover and snap
ring from the brake master cylinder.
Snap Ring Pliers (Close)
Remove the washer, main piston and spring Spring
Master Cylinder Main Piston
from the brake master cylinder.
Clean the inside of the master cylinder and
brake reservoir with brake fluid.
Snap Ring
Rubber Cover
INSPECTION
Check the cylinder inside wall, and spring
for scratch, corrosion or other abnormal
condition.
If any abnormal condition is found, replace
the inner parts or master cylinder.
13-6