KYMCO Mongoose/KXR 250 Service Manual page 103

8
. CYLINDER/PISTON
CYLINDER/PISTON
REMOVAL
Remove the cylinder head. (Refer to the
chapter 7)
Remove the two dowel pins, cylinder head
gasket and cam chain guide.
Unscrew the clamp and disconnect the
water hose.
Remove the cylinder
Remove the cylinder gasket and dowel pins.
Clean any gasket material from the cylinder
surface.
Be careful not to drop foreign matters
into the crankcase.
Remove the piston pin clip.
Place a clean shop towel in the crankcase
to keep the piston pin clip from falling
into the crankcase.
Press the piston pin out of the piston and
remove the piston.
Gasket
Screw
Dowel Pins
Piston
Clip
Mongoose/KXR 250
Cam Chain Guide
Dowel Pins
Cylinder
Water Hose
Gasket
Towel
Piston Pin
8-4