Thermosensor - KYMCO Mongoose/KXR 250 Service Manual

12
. COOLING SYSTEM

THERMOSENSOR

THERMOSENSOR REMOVAL
Drain the coolant. ( 3-20 )
Disconnect the thermosensor wire.
Remove the thermosensor from the
thermostat.
THERMOSENSOR INSPECTION
Suspend the thermosensor in a pan of water
over a burner and measure the resistance
through the sensor as the water heats up.
Temperature( ) 50
Resistance(Ω)
THERMOSENSOR INSTALLATION
Apply 3-BOND No. 1212 sealant or
equivalent to the thermosensor threads and
install it into the thermostat housing.
Connect the thermosensor wire.
Fill the radiator with coolant. ( 3-20)
Be sure to bleed air from the cooling
system.
80 100 120
154 52 27 16
Mongoose/KXR 250
Thermosensor Thermosensor Wire
12-10