KYMCO Mongoose/KXR 250 Service Manual page 80

6
. ENGINE REMOVAL
Mongoose/KXR 250
ENGINE REMOVAL
Drain engine oil and transmission oil.
(Refer to chapter 3)
Remove frame covers and exhaust pipe.
(Refer chapter 2)
Remove the carburetor. (Refer to chapter 5)
Disconnect the oil recycle tube at the
cylinder head cover.
Oil Recycle Tube
Water Hose
Disconnect the water hose from water pump
cover.
Bolt
Thermostat
Remove the bolt at the thermostat and
disconnect the thermosensor wire, then
disconnect the thermostat from the cylinder
head.
Thermosensor Wire
Drive Select Arm
Remove the bolt at the drive select arm,
then disconnect the drive select arm from
engine assembly.
Bolt
6-2