Table of Contents
Advertisement
6. Required tools and equipment
Pull scale – 50kg
Spanner – 17mm; 10mm
Screwdriver – 3.5mm flat
Allen key – 6mm; 4mm
Crimping tool and pin lugs
Side cutters
Hacksaw
Spirit level
Measuring tape
If casting foundation plate into concrete:
Pick
Spade
If bolting foundation plate onto existing plinth:
Drilling equipment
Masonry bits to suit rawlbolts being used
If welding foundation plate and/or rack to gate:
Welding equipment
G-Clamp, 6 inch x 2
If left hand side of gearbox is mounted close to a post:
Socket wrench
Extension piece
17mm socket
If fastening rack to gate:
Drilling equipment
TEK screw socket
page 10
Hide quick links:
Advertisement
Table of Contents
