Symbol Spectrum24 AP-3020 Reference Manual page 73

Spectrum24 Access Point AP-3020 Product Reference Guide
WLAP Hello Time
WLAP Max Age
WLAP Forward Delay Specifies the time (in seconds) to prevent an AP
Sets the time lapse, in seconds, between Config
BPDU packets sent to the Root AP by a designated
WLAP . The default is 20 seconds. If the Root AP
fails to hear from the designated WLAP within the
WLAP Max Age time, it removes the designated
WLAP from its interface table.
The WLAP Hello Time of the Root AP overwrites the
WLAP Hello Time of designated WLAPs. The WLAP
Hello Time does not refer to the time lapse
between beacons sent by the Root AP . If a
designated WLAP fails to receive a beacon, it
knows that its Root WLAP has lost the Root status.
Defines time (in seconds) before discarding aged
configuration messages. This causes a
disconnection between the two WLAPs. The
recommended value is a multiple of the WLAP
Hello Time. The default is 100 seconds.
The WLAP Max Age of the Root AP overwrites the
WLAP Max Age of designated WLAPs.
from forwarding data packets to and from an
interface during initialization. The WLAPs involved
and the wireless operation state
Statistics on page 84)
Delay time. This delay ensures that all WLAP nodes
are heard. The default is five seconds per wireless
operation state.
The WLAP Forward Delay of the Root AP overwrites
the WLAP Forward Delay of designated WLAPs.
Configuring the AP
(See 3.8 Radio
affect the WLAP Forward
65