Symbol Spectrum24 AP-3020 Reference Manual page 41

Using the UI
The UI (User Interface) is a text-based maintenance tool integrated into the
AP . It provides statistical displays, AP configuration options and firmware
upgrades. Access to the UI requires one of the following:
Telnet Client
Direct Serial
Connection
Dial Up Access
SNMP Via a MIB
Browser
Web Browser
Spectrum24 Access Point AP-3020 Product Reference Guide
Gain access to the AP built-in Telnet server from any AP
interface including remote Ethernet connections.
Telnet on page 29.
Acts as a DTE device to connect directly to a DTE device with
a null-modem serial cable. The direct serial access method
requires a communication program with ANSI emulation.
See Using a Direct Serial Connection on page 30.
The dial-up access method requires a communication
program with ANSI emulation on the remote terminal or
PC. The terminal or PC dials to an AP with a modem
connection. The AP supports connection to a Hayes-
compatible 28,800-baud or faster modem.
Dial-Up Connection on page 31.
Gain access to the AP SNMP function via a MIB Browser.
Typically a Network Manager uses this feature, Symbol does
not recommend AP access using this interface method.
Refer to the MIB Browser documentation for usage.
Gain access to the AP built-in Web server from any AP
interface including remote Ethernet
a Web Browser on page 33.
Introduction
See Using
See Using a
connections. See Using
33