Configuring Ppp; Ppp Direct - Symbol Spectrum24 AP-3020 Reference Manual

2.6

Configuring PPP

To use a PPP connection, choose the hardware connection (direct or modem)
and verify the enable status of serial port (default) in the System
Configuration menu.
2.6.1

PPP Direct

A direct null modem serial cable connection between two APs.
From the UI:
1. Select Set Serial Port Configuration from the Main Menu to display:
2. Set the Port Use parameter to
3. Verify that the Modem Connected parameter setting is
4. Set the Connect Mode parameter to
5. Repeat for the other AP . Set the other APs Connect Mode to
Spectrum24 Access Point AP-3020 Product Reference Guide
Symbol Access Point
Port Use
Connect Mode
Modem Connected No
Dialout Mode
Modem Speaker
Dialout Number 1234567
OK-[CR]
(Use the space bar or left/right cursor keys to change)
Serial Port Configuration
UI Answer Wait Time
Answer Inactivity Timeout
PPP Timeout
Auto PPP Terminates
On
Save-[F1]
.
PPP
Answer
Configuring the AP
60
5
3
10
Cancel-[ESC]
.
No
.
Originate
.
67