Answering Ap - Symbol Spectrum24 AP-3020 Reference Manual

7. Configure the other settings as required:
2.6.5

Answering AP

From the answering APs UI:
1. Select Set Serial Port Configuration from the Main Menu.
2. Set the Port Use parameter to
3. Set the Modem Connected parameter to
4. Set the Connect Mode to
5. Configure the other required settings as on the originating AP .
Spectrum24 Access Point AP-3020 Product Reference Guide
Answer Wait Time
Modem Speaker
PPP Timeout
PPP Terminates
Time in seconds waiting for a remote connection
before dropping attempt. The default is
to -second range.
5 255
Sends a command to the modem to turn on or off
the modem speaker. The default is
Controls the timeout between issuing a PPP packet
and expecting a reply. This is necessary if the serial
connection has long delay periods. The
indicates no timeout. The default is
second range.
255-
Controls the PPP terminate requests the AP issues
when a PPP-linked AP does not respond to a
terminate request. The AP closes the PPP
connection after making the maximum requests.
The default is from a
10
request range.
.
PPP
.
Answer
Configuring the AP
.
On
from a
3
to -terminate
0 255
.
Yes
from a
60
value
0
to
0
69