Saving The Configuration - Symbol Spectrum24 AP-3020 Reference Manual

2.17 Saving the Configuration

The AP keeps only saved configuration changes after a reset. To make
configuration changes permanent, save changes as needed.
To save all changes:
•
OR
1. Select Special Functions from the Main Menu to display:
2. Select Save Configuration and press
3. The Save All APs function saves only the five preceding items. The
The NVRAM stores saved configuration information. To clear the NVRAM-
stored configuration,
Spectrum24 Access Point AP-3020 Product Reference Guide
Press F1 in the configuration screens that display the
Symbol Access Point
Clear All Statistics
Clear MU Table
Clear ACL
Clear Address Filters
Load ACL from MU List
Modem Dialout
Modem Hangup
Reset AP
Run MKK Tests
Restore Factory Config.
Save Configuration
Save Config. to All APs
function does not save other configuration parameters when selected.
see 2.17 Restoring Configuration on page 67.
Special Functions Menu
Use TFTP to update Access Point's:
Firmware HTML file
Use XMODEM to update Access Point's:
Firmware HTML file
Use TFTP to update ALL Access Points':
Firmware HTML file
Alter Filename(s)/HELP URL/TFTP Server/DHCP
.Firmware Filename uap_fw.bin
.HTML Filename uap_html.bin
.HELP URL http://www.symbol.com
.TFTP Server 157.235.99.236
.DHCP Disabled
Save All APs
Exit-[ESC]
ENTER
Configuring the AP
option.
Save
BOTH
BOTH
.
95