Symbol Spectrum24 AP-3020 Reference Manual page 10

Introduction
The AP has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
An MU communicating with an AP appears on the network as a peer to
other network devices. The wireless interface is transparent. The AP receives
data from its wired or wireless interfaces and forwards the data to the
proper interface.
The AP has connections for the wired network, external antennas and
power supply. The AP attaches to a wall or ceiling depending on installation-
site requirements.
The AP requires a single antenna for radio transmission and reception.
The dual-antenna system allows the AP to select the best radio signal.
2
built-in diagnostics including a power-up self-check
a four-way bridging architecture (wireless, Ethernet, PPP , internal stack)
wireless MAC interface
10baseT Ethernet port interface with full-speed filtering
100 mW and 500 mW radio versions
power supply IEC connector and a country-specific AC power cable
PC/AT Serial Port Interface
built-in antenna diversity
multiple antenna options
support for 127 mobile units
SNMP support
wireless AP support
repeater functions.
Spectrum24 Access Point AP-3020 Product Reference Guide